Hioki 3129 Phase Detector

HIOKI 3129 Phase Detector

Non-Metallic Contact for Optimal Safety

Magnetic adapter, Fixable to distribution boards. Top “primary supply level” safety class rating for phase detectors. CAT III 600V design meets CE Mark qualifications. Provides both visual and audible phase detection. Detects phase on insulated conductors. Auto power-off function prevents inadvertent battery discharge

Voltage Detection Method : Electrostatic induction method

Voltage Range : 70 to 600V AC (50/60Hz)(sine wave,continuous input)

Clamp Diameter : 2.4mm(0.09in) to 17mm(0.67in) of insulated wiring

Display : Phase Detection : Positive ; 4 LEDs lit in clockwise order and 3 short beeps
Negative ; 4 LEDs lit in counterclockwise order and one continuous beep
Live Wire Check : R-S and S-T lamps will light if voltage between wires are within voltage range

Battery Check Function : ON lamp blinks to indicate battery low status when instrument is turned on

Auto Power Off : Auto shut off if no activity is detected after power is turned ON for 15 minutes

Power supply : Two AA size batteries × 2 (rated voltage:DC3.0V; maximum rated ower:300mVA)

Continuous Use : approx.70 hours (standby)

Dimensions, mass : 70 mm (2.76 in)W × 75 mm (2.95 in)H × 30 mm (1.18 in)D, 200 g (7.1 oz),
Cord length : 0.7m(27.56 in)

Accessories : Carrying case(1), strap(1), R6P manganese batteries(2), spiral tube(1)